|
5645 |
Click on the above
image for a full
view ... |
|
 |
An easy to use 200mV digital panel meter (DPM) |
| |
On-board calibration control |
| |
Very high input impedance - 1000M |
| |
Very low current consumption - typically 1mA |
| A compact, low cost digital panel meter which consists of a PCB based module for mounting in existing equipment, behind a front panel or for making a dedicated voltmeter type instrument. |
| The LCD is 31/2 digits with a digit height of 13mm. The input is up to 200mV with a full scale at ▒199.9mV with an accuracy of ▒0.1% +1 digit. |
| The module is capable of performing both digital voltmeter and ammeter functions, depending on how the input is configured with additional resistor chains (examples are shown in the instructions supplied). Applications can include custom power supply monitoring and other specialised voltmeter and ammeter uses. Input power is in the range of 9 to 12V DC. The module measures just 70 x 50 x 15mm high and has four M3 fixing holes at the corners on 58 x 39mm. |
| Important note: The panel meter OV rail must not be connected to the same OV rail as the voltage being measured. The result of this would be an overload reading on the meter. |
| Input impedance: |
1,000M |
| Accuracy: |
▒0.1% + 1 digit |
| Measurement range: |
▒199.9mV |
| Power supply: |
9V to 12V DC |
| Current drain: |
1mA typical |
| Operating temperature range: |
0°C to 60°C |
|
